Square column
TM Q70 LIFT Gleitführung | TM Q70 LIFT Rollenführung | TM Q70 Kurbel | TMQ70/2 Motor | TM Q70/3 Motor A9 | TM Q70/3 Motor A9Q | TM Q70/3 Motor A9 (SnapX) |
- TM Q70 Lift
- TM Q70 Kurbel
- TM Q70/2 Motor
- TM Q70/3 Motor A9
- TM Q70/3 Motor A9Q
- TM Q70/3 Motor A9 (Snap X)
- Downloads
Description
Two- or three-stage lift column with gas spring. The stable and smooth-running column guarantees quick and easy continuous height adjustment. The TM Q70 Lift embodies mechanical perfection with its high-precision workmanship and quality components.
Material
Precision steel profile, square (TM Q)
Powder-coated or chrome-plated
Guide
Slide bearing (two-stage)
Roller bearing (three-stage)
Non-electric drive
Gas spring
Features
Stroke
500 mm
Adjustment range
Roller bearing
567–987 mm
598–1018 mm
Slide bearing
635 – 1135 mm
Load-bearing capacity
dependent on the fitted gas spring
Dimensions
Outer profile
70 x 70 mm
Installation height
Roller bearing
567 mm
598 mm
Slide bearing
635 mm
Description
Two-stage lift column with crank drive made of square precision steel tube. Thanks to the special slide bearing, the lift column can be smoothly adjusted to the right ergonomic seating height. The TM Q70 Crank embodies mechanical perfection with its high-precision workmanship and quality components. No mono-column. Frame on request.
Material
Precision steel profile, square (Q)
Powder-coated or chrome-plated
Guide
Special slide bearing
Installation height
633 mm
Adjustment range
633–873 mm
Stroke
240 mm
Features
Non-electric drive
Internal crank drive
Dimensions
Outer profile
70 x 70 mm
Installation height
633 mm
Description
Two-stage electrically driven lift column made of square precision steel tube. The TM Q70 is both stable and versatile thanks to its high-precision workmanship and quality components. The lift column is compatible with virtually all control units and operating elements and comes with collision protection as standard.
Material
Precision steel profile, square (TM Q)
Powder-coated or chrome-plated
Guide
Special slide bearings
Drive
A9
A9Q
Features
Adjustment range
from 603 mm
to 1144 mm
The actual working range is determined by the control unit.
Lifting speed
50 mm/s (two-column lift with a load weighing up to 80 kg, symmetrically distributed)
Load-bearing capacity
800 N (single column) 1000 N (desk with two lift columns)
The frame and desktop weight must be taken into account.
Noise level
< 50 dB (A)
Dimensions
Outer profile
70 x 70 mm
Installation height
from 603 mm
Customer-specific
Description
Three-stage electrically driven lift column made of square precision steel tube. The TM Q70 is both stable and versatile thanks to its high-precision workmanship and quality components. The lift column is compatible with virtually all control units and operating elements and comes with collision protection as standard. The three-part design guarantees a low installation height combined with a long stroke length, making it suitable for a wide range of desk applications.
Material
Precision steel profile
Inner, centre and outer profile plastic-coated or chrome-plated
Guide
Special slide bearings
Drive
A 9
Features
Adjustment range
from 506 mm
to 1283 mm
Stroke
608–686 mm
The actual working range is determined by the control unit
Load-bearing capacity
800 N (single column) 1000 N (desk with two lift columns)
Load symmetrically distributed
The frame and desktop weight must be taken into account.
Lifting speed
50 mm/s (two-column lift with a load weighing up to 80 kg, symmetrically distributed)
Noise level
< 50 dB (A)
Dimensions
Outer profile
70 x 70 mm
Installation height
from 506 mm
Customer-specific
Description
Three-stage electrically driven lift column made of square precision steel tube. The TM Q70 is both stable and versatile thanks to its high-precision workmanship and quality components. The lift column is compatible with virtually all control units and operating elements and comes with collision protection as standard. The three-part design guarantees a low installation height combined with a long stroke length, making it suitable for a wide range of desk applications.
Material
Precision steel profile, square (TM Q)
Powder-coated or chrome-plated
Guide
Special slide bearings
Drive
A9Q
Features
Adjustment range
from 506 mm
to 1283 mm
The actual working range is determined by the control unit.
Lifting speed
75 mm/s (two-column lift with a load weighing up to 80 kg, symmetrically distributed;)
Load-bearing capacity
800 N (single column) 1000 N (desk with two lift columns), load symmetrically distributed, The frame and desktop weight must be taken into account.
Noise level
< 50 dB (A)
Dimensions
Outer profile
70 x 70 mm
Installation height
from 506 mm
Customer-specific
Description
Three-stage electrically driven lift column made of square precision steel tube. The TM Q70 is both stable and versatile thanks to its high-precision workmanship and quality components. The lift column is compatible with virtually all control units and operating elements and comes with collision protection as standard. The three-part design guarantees a low installation height combined with a long stroke length, making it suitable for a wide range of desk applications.
Material
Precision steel profile, square (Q)
Powder-coated or chrome-plated
Guide
Special slide bearings
Drive
A9
Features
Stroke
600 mm
Adjustment range
578–1178 mm
The actual working range is determined by the control unit.
Load-bearing capacity
1300 N (desk with two lift columns)
The frame and desktop weight must be taken into account.
Lifting speed
50 mm/s (two-column lift with a load weighing up to 130 kg, symmetrically distributed)
Noise level
< 50 dB (A)
Dimensions
Outer profile
70 x 70 mm
Installation height
578 mm
Downloads
Technisches Datenblatt TM Q70 Lift
Technisches Datenblatt TM Q70 Kurbel
Technisches Datenblatt TM Q 70/2 Motor
Technisches Datenblatt TM Q70/3 Motor A9
Technisches Datenblatt TM Q70/3 Motor A9 (Snap X)
Prüfzertifikat TM Q70_A9_Control Basic/Control Advance
TM Q70 Lift
Description
Two- or three-stage lift column with gas spring. The stable and smooth-running column guarantees quick and easy continuous height adjustment. The TM Q70 Lift embodies mechanical perfection with its high-precision workmanship and quality components.
Material
Precision steel profile, square (TM Q)
Powder-coated or chrome-plated
Guide
Slide bearing (two-stage)
Roller bearing (three-stage)
Non-electric drive
Gas spring
Features
Stroke
500 mm
Adjustment range
Roller bearing
567–987 mm
598–1018 mm
Slide bearing
635 – 1135 mm
Load-bearing capacity
dependent on the fitted gas spring
Dimensions
Outer profile
70 x 70 mm
Installation height
Roller bearing
567 mm
598 mm
Slide bearing
635 mm
TM Q70 Kurbel
Description
Two-stage lift column with crank drive made of square precision steel tube. Thanks to the special slide bearing, the lift column can be smoothly adjusted to the right ergonomic seating height. The TM Q70 Crank embodies mechanical perfection with its high-precision workmanship and quality components. No mono-column. Frame on request.
Material
Precision steel profile, square (Q)
Powder-coated or chrome-plated
Guide
Special slide bearing
Installation height
633 mm
Adjustment range
633–873 mm
Stroke
240 mm
Features
Non-electric drive
Internal crank drive
Dimensions
Outer profile
70 x 70 mm
Installation height
633 mm
Downloads
TM Q70/2 Motor
Description
Two-stage electrically driven lift column made of square precision steel tube. The TM Q70 is both stable and versatile thanks to its high-precision workmanship and quality components. The lift column is compatible with virtually all control units and operating elements and comes with collision protection as standard.
Material
Precision steel profile, square (TM Q)
Powder-coated or chrome-plated
Guide
Special slide bearings
Drive
A9
A9Q
Features
Adjustment range
from 603 mm
to 1144 mm
The actual working range is determined by the control unit.
Lifting speed
50 mm/s (two-column lift with a load weighing up to 80 kg, symmetrically distributed)
Load-bearing capacity
800 N (single column) 1000 N (desk with two lift columns)
The frame and desktop weight must be taken into account.
Noise level
< 50 dB (A)
Dimensions
Outer profile
70 x 70 mm
Installation height
from 603 mm
Customer-specific
TM Q70/3 Motor A9
Description
Three-stage electrically driven lift column made of square precision steel tube. The TM Q70 is both stable and versatile thanks to its high-precision workmanship and quality components. The lift column is compatible with virtually all control units and operating elements and comes with collision protection as standard. The three-part design guarantees a low installation height combined with a long stroke length, making it suitable for a wide range of desk applications.
Material
Precision steel profile
Inner, centre and outer profile plastic-coated or chrome-plated
Guide
Special slide bearings
Drive
A 9
Features
Adjustment range
from 506 mm
to 1283 mm
Stroke
608–686 mm
The actual working range is determined by the control unit
Load-bearing capacity
800 N (single column) 1000 N (desk with two lift columns)
Load symmetrically distributed
The frame and desktop weight must be taken into account.
Lifting speed
50 mm/s (two-column lift with a load weighing up to 80 kg, symmetrically distributed)
Noise level
< 50 dB (A)
Dimensions
Outer profile
70 x 70 mm
Installation height
from 506 mm
Customer-specific
TM Q70/3 Motor A9Q
Description
Three-stage electrically driven lift column made of square precision steel tube. The TM Q70 is both stable and versatile thanks to its high-precision workmanship and quality components. The lift column is compatible with virtually all control units and operating elements and comes with collision protection as standard. The three-part design guarantees a low installation height combined with a long stroke length, making it suitable for a wide range of desk applications.
Material
Precision steel profile, square (TM Q)
Powder-coated or chrome-plated
Guide
Special slide bearings
Drive
A9Q
Features
Adjustment range
from 506 mm
to 1283 mm
The actual working range is determined by the control unit.
Lifting speed
75 mm/s (two-column lift with a load weighing up to 80 kg, symmetrically distributed;)
Load-bearing capacity
800 N (single column) 1000 N (desk with two lift columns), load symmetrically distributed, The frame and desktop weight must be taken into account.
Noise level
< 50 dB (A)
Dimensions
Outer profile
70 x 70 mm
Installation height
from 506 mm
Customer-specific
TM Q70 Motor A9 (Snap X)
Description
Three-stage electrically driven lift column made of square precision steel tube. The TM Q70 is both stable and versatile thanks to its high-precision workmanship and quality components. The lift column is compatible with virtually all control units and operating elements and comes with collision protection as standard. The three-part design guarantees a low installation height combined with a long stroke length, making it suitable for a wide range of desk applications.
Material
Precision steel profile, square (Q)
Powder-coated or chrome-plated
Guide
Special slide bearings
Drive
A9
Features
Stroke
600 mm
Adjustment range
578–1178 mm
The actual working range is determined by the control unit.
Load-bearing capacity
1300 N (desk with two lift columns)
The frame and desktop weight must be taken into account.
Lifting speed
50 mm/s (two-column lift with a load weighing up to 130 kg, symmetrically distributed)
Noise level
< 50 dB (A)
Dimensions
Outer profile
70 x 70 mm
Installation height
578 mm